🕑 Reading time: 1 minute

Stamped physical is an innovative physical widely applied for the floor in patios, motorcar porch, driveways and sidewalks. It is extremely docile in nature and can be finished to resemble brick, slate, flagstone, tile, stone, wood and diverse other patterns and textures.

Fig 1: Cracks and Distress in Stamped Physical.

The major reward of using stamped concrete is its flexibility to get moulded to resemble other building materials and textures which makes it a cheaper alternative over using other authentic materials such as stone, slate or brick.

Contents:

  • Repair Procedure of Stamped Concrete
    • 1. Surface Grooming
    • ii. Grooming of Patching Mixture
    • 3. Application of Patching Fabric
    • iv. Re-Stamping of Repaired Concrete
    • 5. Sealing of Repaired Physical
  • Repair Tips for Stamped Concrete

Repair Procedure of Stamped Concrete

The repair of stamped concrete is explained through the five steps listed below :

1. Surface Preparation

Firstly, the cracks or the distress where the concrete is to be repaired must exist cleaned properly. Every mote of dust or the traces of loose particles must be removed, and then that they do not hinder the patching material bail with the existing concrete.

To farther remove the loose particles, soapy water can be used to launder off the loose dirt and debris. Intendance must be taken to rinse and dry the concrete.

2. Preparation of Patching Mixture

Depending upon the blazon of distress to exist repaired, suitable patching textile is selected. A proportionate amount of h2o and concrete bonding fabric is mixed and made into a paste.

The colour of the patching mixture must blend with the existing stamped concrete to ensure a uniform appearance and therefore concealing the signs of repair.

3. Application of Patching Material

Application of patch mixture depends on the blazon of fissure and distress to be repaired. If the cracks are minor, information technology tin can be patched with the help of finger awarding. For this type of application, gloves must be used and the cracks must be filled upwardly completely. Afterwards the application of patch textile, with the employ of a clammy sponge, the edges of the cracks are smoothened to give it a uniform advent.

Fig two: Applying of Patching mixture into the stamped concrete.

For very large cracks, the patching mixture is filled into the crack and smoothened with a trowel. Cascade in a surface release agent to facilitate the procedure as you imprint the desired blueprint onto the concrete.

4. Re-Stamping of Repaired Concrete

It is important to give the same finish and pattern that was present on the concrete initially. To do that, obtain the verbal pattern that was used during installation. The stamp stencil is pressed confronting the fresh concrete and afterward a flow of 24hrs, the stencil is removed and the surface is cleaned with soapy water and left to dry out out. Proper curing must exist ensured for farther distress.

Fig 3: Finishing of stamped physical.

5. Sealing of Repaired Concrete

As a concluding step, seal the repaired area with a concrete sealant. This volition assist to protect your patio from harm and preserve the integrity of the installation.

Repair Tips for Stamped Concrete

  1. Matching the colour of repair concrete and the existing stamped concrete is very of import. A variety of colouring agents are available in the market that tin can exist used during the preparation of patching paste. One can likewise colour regular or white concrete with water-based metallic oxide pigments, which are designed for tinting concrete.
  2. Application of sealant over the repaired part of physical helps to protect the concrete from oils and stains. In addition, removing sealer from effectually the crack prior to repair improves adhesion.
  3. Working weather must be suitable for repair works. For best results,
    repair works must be done at temperatures between 50 and 90 degrees. The temperature must remain to a higher place freezing while the concrete cures.

Read More: Stamped Physical and Its Training and Construction Methods